Quantcast
Servings: 54 Servings
Ingredients:
4 lb Alexanders light unhopped
Malt extract
1 1/2 lb Light dried malt extract
(DME)
5    AAUs
Hops
10    % alpha chinook)
1 1/2 oz Hallertauer or Tetnanger
Hops for finishin
Ale yeast (Wyeast American
Ale #1056,
Aka Sierra Nevada *strongly*
Ecomended)
Your favourite bittering

Dissolve the extracts in 5 gallons of brewing water. Bring to boil.
After 15 minutes, add bittering hops. Boil 60 minutes total. Turn off
heat and add finishing hops. Cool as rapidly as possible to 60-70F. Rack to
fermenter, fill to 5 gallons, pitch yeast, relax, etc. Ferment as cool as
you can muster, to keep the esters down. If you can, rack the wort off the
trub before the fermentation really gets started (i.e. let it settle out
for 4-6 hours, then rack, but pitch the yeast *first* to avoid nasty
suprises). Use an ale yeast that is clean (i.e. produces few esters).
Reportedly, Wyeast #1056 (American Ale) is supposed to be the best
yeast in this regard. You can also culture this strain (or one with a
*very* similar flavour profile) from Sierra Nevada ales. Boil the full
volume of your wort. The more dilute wort gives better hop utilization,
and helps avoid carmelization of the wort. After bottling or kegging and
subsequent carbonation, let the brew lager in the refrigerator for 4-6
weeks.

Todd Enders







Comments:


Leave a Reply

Return to Top ▲Return to Top ▲